Professional Popcorn Ceiling Removal in Port St. Lucie, FL
Popcorn ceiling removal in Port St. Lucie runs $2–$4 per sq ft for a basic scrape and paint, plus $1–$2 per sq ft for skim coating to a smooth finish. KB Painting & Refinishing's own W-2 crew — never subcontractors — handles removal in the pre-2000 sections of Torino. Ask us to confirm coverage for your specific scope in the written estimate.
Local insight
Older Port St. Lucie homes near the Torino neighborhood and the original US-1 corridor were built during the popcorn-ceiling era, and many still have the original texture. Florida's humidity tends to stain popcorn ceilings faster than in drier climates — water intrusion from roof leaks or AC condensate drips leaves rings that popcorn texture makes nearly impossible to spot-repair.
Prices are planning ranges. Home floor area is different from paintable surface area; included surfaces, condition, access, and products determine your written quote. Request a scope-specific estimate.
Popcorn ceiling removal in Port St. Lucie
Homes built in Port St. Lucie’s earlier residential phases — particularly in Torino and neighborhoods east of US-1 developed in the 1980s — often retain their original popcorn texture ceilings. The texture itself isn’t structurally harmful, but it collects dust, stains easily from humidity and AC condensate, and makes any water damage immediately visible as a spreading brown ring that can’t be painted over cleanly. Removing it and finishing to a smooth or knockdown surface solves all three problems at once.
The removal process is straightforward when the drywall underneath is in good shape, but Port St. Lucie homes with a history of roof leaks or bathroom moisture intrusion often have soft spots or tape failures hiding under the texture. We inspect the drywall condition before starting and include minor drywall repair in our standard scope — you won’t get a flat ceiling with a patch bump where the old damage was.
Our process
We begin with a moisture test of the ceiling surface. Dry popcorn scrapes cleanly; wet texture becomes a paste that damages the drywall paper underneath. If needed, we wet-scrape in small sections with careful control. After scraping, we skim-coat any damaged areas and apply a flat primer before the finish coat.
Finish options include smooth (skim-coat level 5), light orange peel, or knockdown texture — all common in Port St. Lucie new construction. The ceiling is painted with two coats of Sherwin-Williams flat ceiling paint as the final step. Everything from scraping through paint is included in one project scope.
Questions Port St. Lucie homeowners ask
Suspected asbestos-containing texture should not be disturbed before assessment by a trained asbestos professional. A building’s age or appearance does not establish whether its ceiling contains asbestos. KB Painting does not perform asbestos abatement; any required specialist work and clearance must be resolved before our ceiling finishing work.
See the EPA’s guidance on identifying asbestos and Florida DEP’s asbestos guidance. Requirements depend on the building and project, not a universal pre-1980 rule.
Can you remove popcorn ceilings in just one room while leaving the rest of the house intact? We can, and it’s a common request. We seal off the work area to contain dust, and we can match whatever ceiling texture the rest of your home has when we finish. Many homeowners start with the master bedroom or main living area and schedule additional rooms later.
What neighbors say
Charles J. 5.0 ★
My wife and i wanted our driveway to have some color and we heard alot of good things about KB Painting, we had them concrete stain it and they did an amazing job. Highly recommend them in the Port St. Lucie area if you have any painting needs or wants!
Jeff M. 5.0 ★
I had KB Painting come out and paint the entire interior of my house here in Port St Lucie and they did not disappoint! Very clean, professional, and respectful! Steve the project manager was very communicative the whole process. I highly recommend them!
What KB Painting customers say
More services in Port St. Lucie
Get a free estimate in Port St. Lucie
Call (772) 222-3227 or fill out the form. We schedule an on-site visit and provide a written, itemized quote.
Common questions
Which Port St. Lucie neighborhoods does KB Painting serve for popcorn ceiling removal?
We provide popcorn ceiling removal throughout Port St. Lucie, including Sandpiper Bay, Lyngate, Morningside, Sandhill Crossing, St. Lucie West, Tradition, Torino, PGA Village, Southbend, Gatlin Boulevard corridor, Riverview. All work is done by KB Painting's own employees. Ask us to confirm coverage for your specific scope in the written estimate. For a free estimate in Port St. Lucie, call (772) 222-3227.
How much does popcorn ceiling removal cost in Port St. Lucie?
In Port St. Lucie, the planning range is $2–$4 per sq ft for basic removal and painting, with roughly $1–$2 per sq ft extra for skim coating. Ceiling height, condition, access, and finish affect the quote. Any asbestos assessment or abatement is a separate specialist scope, not included in a standard removal price.
Which Port St. Lucie neighborhoods still have popcorn ceilings?
Popcorn texture is most common in Port St. Lucie homes built before 2000 — particularly the older sections of Torino and the neighborhoods east of US-1 developed in the 1980s. Newer construction generally shipped with knockdown or orange-peel ceilings instead, which is also what KB Painting can match when finishing a ceiling after removal.
Can a stained popcorn ceiling in Port St. Lucie just be painted over?
Usually not cleanly. In Port St. Lucie's humidity, water rings from roof leaks or AC condensate drips soak into popcorn texture, and the texture makes spot repairs nearly impossible to hide. KB Painting removes the texture, repairs and skim-coats any damaged drywall underneath, then primes and applies two coats of Sherwin-Williams flat ceiling paint for a uniform result.
Ready to start your popcorn ceiling removal project in Port St. Lucie?
Phone & online inquiries: 24/7. On-site work is scheduled separately.